Send Inquiry
Demineralized Plant
115000 INR/Unit
Product Details:
- Feature Demineralization plant
- Water Out Conductivity 100%
- Power Consumption 24 V Volt-Ampere (VA)
- Water in conductivity upto 5000 TDS
- Recycle Rate 1000 liter
- Purity Level 100%
- Water Source Ground Water
- Click to View more
X
Demineralized Plant Price And Quantity
- 115000 INR/Unit
- 1 Liter
Demineralized Plant Product Specifications
- 24 dc Volt (v)
- upto 5000 TDS
- SS, FRP
- 1000 liter
- Electric
- Demineralized Plant
- 24 V Volt-Ampere (VA)
- Electric
- 100%
- 100%
- Demineralization plant
- Ground Water
- 10000 Liter (L)
- Full Automatic
Demineralized Plant Trade Information
- kalyan
- Cash in Advance (CID)
- 2 Liter Per Week
- 1 Week
- Sample costs shipping and taxes has to be paid by the buyer
- All India
Product Description
Demineralization or Deionisation is the process of removing mineral salts from water by using the ion exchange process. Impurities that remains dissolved in water dissociate to form positive and negative charged particles known as ions. An ion-exchange vessel holds ion-exchange resin of the required type through which water is allowed to pass. The selective ions in the water are exchanged with ions or radicals loosely held by the resin. In this way, the water is passed through several vessels or a mixed bed vessel so that both positive and negative ions are removed and water is dematerialized.
We at Aquamom, provide Wide range of custom-built Demineralization plants for industrial process water applications, with inherent design to conserve water, and save costs. Our unique design of D.M. plant ensures the maximum utilization of the effective surface area, uniform space and linear velocity across the resin bed which provides effective contact time between water and resin bed, yield salt free water for process equipment where water is being used for further application.
Aquamom DM Plants are available in diameters from 0.225 Mts. to 4.0 Mts. with the flow rate sup to 250M3/Hr. and OBR up to 2200 M3@800 PPM TDS. These strong, pre-engineered, pre-assembled units minimize installation and start-up costs. Our D.M. Plant is acclaimed in the market for cost efficiency and consistent functioning.
Working Principal
A Typical two-bed DM Plant consists of two FRP/MSRL/SS Pressure vessels connected in series along with its internal fittings.ï
The first unit consists of high capacity strong acid cation(SAC) exchange resin, which replaces positive ions of salt with hydrogen ions to form respective acids, which are absorbed in next vessel by strong base anion (SBA) exchange resin.ï
The water obtained by this process shows conductivity less than 20 u S / cm at 25 deg C and total dissolved solids less than 10 ppm.
Technician specification of DM plant
Flow : 0.5M3/Hr.- 250 M3/Hr.
OBR : 2200 m3
Inlet TDS : Up to 800 Mg/L
Outlet TDS : <10 - 20 mg/L
Linear Velocity : 4 to 30 M/Hr.
Space Velocity : 4 to 20 M/Hr.
Type of Resin : Strong Acid Cation (H+ - Mono Type) : Strong Base Anion (OH+ - Mono Type)
Type of Regenerant : HCL / H2SO4 for SAC & NaOH for SBA.
Diameter (Vertical Vessel) : 0.225 Mts. - 4.0 Mts.
MOC : FRP / Mid Steel / Stainless Steel
Coating / lining : : Epoxy / FRP / Rubber Lined
Design Pressure : Up to 10 Bar
Working Pressure : 1.1 to 3.5 Bar
Clear Pressure Drop : 0.3 bar
Top distribution system : bell mouth
Bottom distribution system : Strainer plate
MOC of Brine Measuring Tank : FRP/HDPE/MSRL
Brine Mixing Element : Agitator/Aeration
Sailent features of DM Plant
Corrosion resistant resin and brine tank construction.
Timer-based automatic regeneration (Optional)
High quality DM resin provides stability and uniform size for top performance and long life.
Simple inline configuration for ease of installation and maintenance.
Range of demineralization Plant to suit industrial applications.
Available in simplex and duplex configurations for intermittent or continuous use.
DM Plant are available in MS, MSRL, FRP, operating in Manual / Auto mode
Proved mechanism of top distribution and bottom collection system, made of laser cut strainer embedded on rubber lined strainer plate.
Resin trap at the backwash line.
Benefits of DM plant
Easy to install and operate.
Produces high quality Water
Incorporates high-capacity polystyrene bead type cation& anion exchange resin which is remarkably stable and has a long life.
Total Dissolve solid removal.
Complete Assembly with backwash eneration equipment
Variety of cost effective standard models.
Simpler distribution and collection systems
Application of DM plant
Industry
Medium and High Pressure Boiler feed.
Process Water
Post treatment of RO Plant
Pre Treatment of Mixed Bed unit for High Purity
WFI (Water for Injection)
Highly Benefited for Power Plant and Pharmaceutical application.
Enter Buying Requirement Details
Other Products in 'Water Treatment Plants ' category
LIQUATECH CORPORATION
All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.
Developed and Managed by Infocom Network Private Limited.
